High Speed Eight-head Automatic Spout Pouch Filling And Packing Machine manufacturer
Item specifics
- Packaging products
- Liquid and pastes
- Filling specification
- 30-2000ML
- Hopper size
- 150L（304 stainless steel ）
- Machine power
- 8Kw
Review
Description
Introduction of Eight-head Automatic Spout Pouch Filling And Packing Machine
Shutting down and routine maintenance
1. Correct Shutdown Sequence:
First, stop the material supply and allow the equipment to process the remaining material and film.
Turn off the heating system and allow the equipment to continue running at low speed for a period of time while cooling to prevent the mold from deforming due to prolonged high temperatures.
Finally, turn off the main power and air supply.
2. Daily/Shift Cleaning:
Thoroughly clean the inside and outside of the equipment, including the mold, hopper, conveyor belt, etc.
Add the specified lubricating oil to components requiring lubrication (such as guide rails and bearings).
3. Regular Maintenance:
Weekly/Monthly Maintenance: Check the tightness of all transmission components (such as timing belts and chains), check and drain the air filter, and tighten the screws in critical areas.
Annual Maintenance: It is recommended that a comprehensive inspection, calibration, and replacement of vulnerable parts (such as seals, heating elements, and thermocouples) be performed by a professional technician.
Safety Precautions of Eight-head Automatic Spout Pouch Filling And Packing Machine
Strictly follow the operating procedures: Untrained personnel are strictly prohibited from operating the equipment.
Use safety guards: All protective covers and safety doors on the equipment must remain closed during operation; removal or shielding is strictly prohibited.
Beware of high temperatures and moving parts: The sealing mold and other parts of the machine will reach extremely high temperatures during operation and immediately after shutdown; touching them is strictly prohibited. Also, keep away from moving parts such as the cutter and drive shaft.
Use the emergency stop button effectively: In any emergency, press the emergency stop button immediately.
Perform maintenance and repairs with the power off: Before performing any adjustments, cleaning, or repairs, the main power must be turned off and the machine locked and tagged (LOTO) to prevent accidental restarting.
